SII
close button

Hindustan Institute of Technology and Science (HITS)

No.01, Rajiv Gandhi Salai (OMR), Padur, (Via) Kelambakkam. ,chennai
1985

About Us

With the noble vision: “To Make Every Man a Success and No Man a Failure”, Hindustan University chisels today’s citizens to face the future with confidence. The cherished objective of building a Centre of Excellence in Engineering was the need of the hour in the 1980’s. This need led to the establishment of Hindustan College of Engineering (HCE) in 1985. HCE was awarded the status of Deemed University in 2008 in recognition of its excellence in education and contribution to the Nation. The University is recognized by UGC, NBA, NAAC, AICTE, MHRD & COA. Hindustan Institute of Technology and Science is one of the most sought after engineering institutions in Tamil Nadu. It is reputed for its highly qualified and experienced faculty, excellent infrastructural facilities, curricular and extracurricular activities. The University has maintained an enviable academic excellence right from its inception. The student community comprises of students from all over India and overseas. The university has students hailing from Afghanistan, Bangladesh, Bhutan, China, Egypt, Ethiopia, France, Indonesia, Kenya, Korea, Liberia, Libya, Mauritius, Nigeria, Oman, Rwanda, Singapore, Japan, Sri Lanka, Saudi Arabia, South Africa, South Korea, Sudan, U.A.E, Thailand, Vietnam, China, Tanzania, USA, etc.

Area of Excellence

- Centre for Clean Energy and Nano Convergence - Centre for Defence Technology Studies - Centre for Photonics and Lidar Research - Centre for Automation and Robotics - Centre for TIFAC Core in Aircraft Maintenance - Centre for SIMENDES - Centre for Autonomous Systems - Centre for Sensors and Process Control - Centre for Sustainable Technologies - Centre for Autotronics - Centre for Structural Impact Crush Simulation - Centre for Networking and Cyber Defence - Centre for Machine Intelligence and Data Analysis Research centre - HELM-Dr.KCG Verghese Centre for Higher Education Leadership & Management

Research Capability and Focus Area

Research Areas Discipline Broad Area of Research School of Aeronautical Engineering • Aero Dynamics • Avionics / Aero Space / Launch Vehicle • GPS and Local Area Augmentation Systems • Joint Precision Approach and Landing Systems • Automatic Dependent Surveillance Broadcast • Dual Airborne Laser Scanner • Composites • Aircraft Maintenance Engineering (with NDT) School of Building Sciences Structural Engineering • Cold formed Steel • Concrete, Composite & Dynamics of structures • Sustainable concrete & Steel structures • Earthquake engineering • Retro fitting of structures Environmental Engineering • Advanced oxidation Technologies for Water, Waste gas, Wastewater Treatment and Hydrogen Production • Air Quality Modelling and Waste Management Water Resources • CO2 Sequestration • Maintenance Optimization in Water Distribution Networks Performance Evaluation of pipe networks • Sustainable Water Management Integrated • Water Resources Management • Urban Planning • PERI – URBAN,Energy Efficient Architecture • Landscape Architecture • Smart Building • Construction Engineering • Highway Engineering • Civionics • Transportation Engineering School of Electrical Sciences ECE • Communication Network security • Signal Processing • Wireless Sensor Network • Wireless Communication Networks-Mobile • Photonics EEE • Process Control • Renewable Energy • Signal Processing • Power system • High Voltage Engineering • Power Electronics School of Mechanical Engineering • Friction, Wear and Lubrication (Tribology) • Industrial Office Ergonomics • Heat Exchangers and Heat Transfer • Thermal Energy Systems • Materials and Metallurgy • Nano Materials • Composites • Ceramics • Renewable Energy • CAD/CAM/CAE • Mechatronics • Robotics & Pneumatics • Machine Vision • Metal Cutting • Cylindrical / Surface Grinding • Welding Technology • Alternate Fuels& Bio Diesel • Vehicle Dynamics • Autotronics School of Computing Sciences • Big Data • Network Security • Machine Intelligence • Advanced Computing • Adhoc Networks • Internet of Things • Cloud Computing • Image Processing School of Management Studies • Media Management • Business Analytics • Logistic and Supply Chain Management • Social Entrepreneurship • Resource Management and Sustainable Development • Hospitality Management • Healthcare Management • Information Systems Bio Technology • Tissue Engineering • Stem Cell Research • Stress Biology • Genetic Engineering • Microbial Technology • Toxicology • Cancer Biology Mathematics • Graph Theory • Differential Equation • Numerical Methods • Fuzzy Graphs • Quantitative Techniques & Statistics • Fluid Dynamics • Operation Research • Topology Chemistry • Inorganic Materials • Catalysis • Targeted drug delivery • Organic synthesis Complexes Physics • Materials Science • Conducting Polimers • Nanocomposites • Magnetic Materials • Thin Films English • English Language Teaching • Aviation English • Business English • Computer Assisted Language Learning • American Literature • Past Colonial Literature • British Literature • Linguistics • Canadian Literature • Aboriginal Literature

Notable Research / Publication

1. Baskaralingam P., Pulikesi M., Elango D., Ramamurthi V., Sivanesan S. Adsorption of acid dye onto organobentonite 2006 Journal of Hazardous Materials 2. Sengottuvel P., Satishkumar S., Dinakaran D. Optimization of multiple characteristics of EDM parameters based on desirability approach and fuzzy modeling 2013 Procedia Engineering 3. Prabaharan M. Chitosan-based nanoparticles for tumor-targeted drug delivery 2015 International Journal of Biological Macromolecules 4. Sundaraganesan N., Meganathan C., Joshua B.D., Mani P., Jayaprakash A. Molecular structure and vibrational spectra of 3-chloro-4-fluoro benzonitrile by ab initio HF and density functional method2008 Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy 5. Elango D., Pulikesi M., Baskaralingam P., Ramamurthi V., Sivanesan S. Production of biogas from municipal solid waste with domestic sewage 2007 Journal of Hazardous Materials 6. Nagarajan P.K., Subramani J., Suyambazhahan S., Sathyamurthy R. Nanofluids for solar collector applications: A review 2014 Energy Procedia 7. Srinivasan M.K., Sarukesi K., Rodrigues P., Manoj M.S., Revathy P. State-of-the-art cloud computing security taxonomies - A classification of security challenges in the present cloud computing environment 2012 ACM International Conference Proceeding Series 8. Karthikeyan S., Ravikumar Solomon G., Kumaresan V., Velraj R. Parametric studies on packed bed storage unit filled with PCM encapsulated spherical containers for low temperature solar air heating applications 2014 Energy Conversion and Management 9. Jain V., Baitharu I., Prasad D., Ilavazhagan G. Enriched Environment Prevents Hypobaric Hypoxia Induced Memory Impairment and Neurodegeneration: Role of BDNF/PI3K/GSK3β Pathway Coupled with CREB Activation 2013 PLoS ONE 10. Sathyamurthy R., Kennady H.J., Nagarajan P.K., Ahsan A. Factors affecting the performance of triangular pyramid solar still 2014 Desalination 11. Kaimal V.K., Vijayabalan P. A detailed study of combustion characteristics of a DI diesel engine using waste plastic oil and its blends 2015 Energy Conversion and Management 12. Suresh S., Ramanand A., Jayaraman D., Mani P. Review on theoretical aspect of nonlinear optics 2012 Reviews on Advanced Materials Science 13. Elango D., Thinakaran N., Panneerselvam P., Sivanesan S. Thermophilic composting of municipal solid waste 2009 Applied Energy 14. Arunkumar T., Velraj R., Denkenberger D.C., Sathyamurthy R., Kumar K.V., Ahsan A. Productivity enhancements of compound parabolic concentrator tubular solar stills 2016 Renewable Energy 15. Sathyamurthy R., El-Agouz S.A., Dharmaraj V. Experimental analysis of a portable solar still with evaporation and condensation chambers 2015 Desalination 16. Sathyamurthy R., Nagarajan P.K., El-Agouz S.A., Jaiganesh V., Sathish Khanna P. Experimental investigation on a semi-circular trough-absorber solar still with baffles for fresh water production 2015 Energy Conversion and Management 17. Arunkumar T., Velraj R., Denkenberger D., Sathyamurthy R., Vinothkumar K., Porkumaran K., Ahsan A. Effect of heat removal on tubular solar desalting system 2016 Desalination 18. Arunkumar T., Denkenberger D., Velraj R., Sathyamurthy R., Tanaka H., Vinothkumar K. Experimental study on a parabolic concentrator assisted solar desalting system 2015 Energy Conversion and Management 19. Baitharu I., Jain V., Deep S.N., Hota K.B., Hota S.K., Prasad D., Ilavazhagan G. Withania somnifera root extract ameliorates hypobaric hypoxia induced memory impairment in rats 2013 Journal of Ethnopharmacology 20. Udhayakumar A., Charles V., Kumar M. Stochastic simulation based genetic algorithm for chance constrained data envelopment analysis problems 2011 Omega 21. Kabinejadian F., Chua L.P., Ghista D.N., Sankaranarayanan M., Tan Y.S. A novel coronary artery bypass graft design of sequential anastomoses 2010 Annals of Biomedical Engineering 22. Sathyamurthy R., Nagarajan P.K., Subramani J., Vijayakumar D., Mohammed Ashraf Ali K. Effect of water mass on triangular pyramid solar still using phase change material as storage medium 2014 Energy Procedia 23. Sathyamurthy R., Nagarajan P.K., Kennady H.J., Ravikumar T.S., Paulson V., Ahsan A. Enhancement of fresh water production on triangular pyramid solar still using phase change material as storage material 2014 Frontiers in Heat and Mass Transfer 24. Nagarajan P.K., Vijayakumar D., Paulson V., Chitharthan R.K., Narashimulu Y., Ramanarayanan, Sathyamurthy R. Performance evaluation of triangular pyramid solar still for enhancing productivity of fresh water 2014 Research Journal of Pharmaceutical, Biological and Chemical Sciences 25. Harris Samuel D.G., Nagarajan P.K., Sathyamurthy R., El-Agouz S.A., Kannan E. Improving the yield of fresh water in conventional solar still using low cost energy storage material 2016 Energy Conversion and Management 26. Solomon G.R., Velraj R. Analysis of the heat transfer mechanisms during energy storage in a Phase Change Material filled vertical finned cylindrical unit for free cooling application 2013 Energy Conversion and Management 27. Jeyapoovan T., Murugan M. Surface roughness classification using image processing 2013 Measurement: Journal of the International Measurement Confederation 28. Dinakaran D., Sampathkumar S., Sivashanmugam N. An experimental investigation on monitoring of crater wear in turning using ultrasonic technique 2009 International Journal of Machine Tools and Manufacture 29. Hussain T., Panigrahi P., Ahuja R. Sensing propensity of a defected graphane sheet towards CO, H2O and NO2 2014 Nanotechnology 30. Mohan Kumar R., Gopalakrishnan N., Jayavel R., Ramasamy P. Investigations on the nucleation kinetics of L-arginine phosphate single crystals 1999 Crystal Research and Technology 31. Sivashankari P.R., Prabaharan M. Prospects of chitosan-based scaffolds for growth factor release in tissue engineering 2016 International Journal of Biological Macromolecules 32. Vijayasundaram S.V., Suresh G., Mondal R.A., Kanagadurai R. Substitution-driven enhanced magnetic and ferroelectric properties of BiFeO3 nanoparticles 2016 Journal of Alloys and Compounds 33. Hariram V., Bharathwaaj R. Extraction and optimization of biodiesel yield from wax esters of apis melifera (Honey bee) 2015 International Journal of ChemTech Research 34. Sathyamurthy R., Harris Samuel D.G., Nagarajan P.K., El-Agouz S.A. A review of different solar still for augmenting fresh water yield 2015 Journal of Environmental Science and Technology 35. Mani P., Umamaheswari H., Dominic Joshua B., Sundaraganesan N. Molecular structure, vibrational spectra and NBO analysis of phenylisothiocyanate by density functional method 2008 Journal of Molecular Structure: THEOCHEM 36. Seeli D.S., Prabaharan M. Guar gum oleate-graft-poly(methacrylic acid) hydrogel as a colon-specific controlled drug delivery carrier 2017 Carbohydrate Polymers 37. Baitharu I., Jain V., Deep S.N., Shroff S., Sahu J.K., Naik P.K., Ilavazhagan G. Withanolide A prevents neurodegeneration by modulating hippocampal glutathione biosynthesis during hypoxia 2014 PLoS ONE 38. Hariram V., Mohan Kumar G. Combustion analysis of algal oil methyl ester in a direct injection compression ignition engine 2013 Journal of Engineering Science and Technology 39. Velavan A., Sumathi S., Balasubramanian K.K. Unsymmetrical tetrasubstituted ureas from tertiary carbamoylimidazole: Activation by AlMe<inf>3</inf> 2012 Organic and Biomolecular Chemistry 40. Gowrigolla B., Sivaji S., Masillamani M.R. Design and auditing of Cloud computing security 2010 Proceedings of the 2010 5th International Conference on Information and Automation for Sustainability, ICIAfS 2010 41. Seeli D.S., Dhivya S., Selvamurugan N., Prabaharan M. Guar gum succinate-sodium alginate beads as a pH-sensitive carrier for colon-specific drug delivery 2016 International Journal of Biological Macromolecules 42. Maiti P., Manna J., Ilavazhagan G., Rossignol J., Dunbar G.L. Molecular regulation of dendritic spine dynamics and their potential impact on synaptic plasticity and neurological diseases 2015 Neuroscience and Biobehavioral Reviews 43. Sathyamurthy R., Harris Samuel D.G., Nagarajan P.K., Jaiganesh V. Experimental investigation of a semi circular trough solar water heater 2015 Applied Solar Energy (English translation of Geliotekhnika) 44. Kiruthika V., Ramya M.M. Automatic segmentation of ovarian follicle using K-means clustering 2014 Proceedings - 2014 5th International Conference on Signal and Image Processing, ICSIP 2014 45. Rameshkumar K., Sambath M., Ravi S. Relevant association rule mining from medical dataset using new irrelevant rule elimination technique 2013 2013 International Conference on Information Communication and Embedded Systems, ICICES 2013 46. Baitharu I., Deep S.N., Jain V., Prasad D., Ilavazhagan G. Inhibition of glucocorticoid receptors ameliorates hypobaric hypoxia induced memory impairment in rat 2013 Behavioural Brain Research 47. Solomon G.R., Karthikeyan S., Velraj R. Sub cooling of PCM due to various effects during solidification in a vertical concentric tube thermal storage unit 2013 Applied Thermal Engineering 48. Hariram V., Mohan K.G. The effect of injection timing on combustion, performance and emission parameters with AOME blends as a fuel for compression ignition engine 2012 European Journal of Scientific Research 49. Sankar A., Natarajan S., Haboussi M., Ramajeyathilagam K., Ganapathi M. Panel flutter characteristics of sandwich plates with CNT reinforced facesheets using an accurate higher-order theory 2014 Journal of Fluids and Structures 50. Prakash A. A biometric approach for continuous user authentication by fusing hard and soft traits 2014 International Journal of Network Security 51. Rajkumar B., Vijay Kalimuthu B., Rajkumar R., Santhakumar A.R. Proportioning of recycled aggregate concrete 2005 Indian Concrete Journal 52. Sathyamurthy R., El-Agouz S.A., Nagarajan P.K., Subramani J., Arunkumar T., Mageshbabu D., Madhu B., Bharathwaaj R., Prakash N. A Review of integrating solar collectors to solar still 2017 Renewable and Sustainable Energy Reviews 53. Sathyamurthy R., Harris Samuel D.G., Nagarajan P.K. Theoretical analysis of inclined solar still with baffle plates for improving the fresh water yield 2016 Process Safety and Environmental Protection 54. Kaimal V.K., Vijayabalan P. A study on synthesis of energy fuel from waste plastic and assessment of its potential as an alternative fuel for diesel engines 2016 Waste Management 55. Ryong Ryu S., Ram S.D.G., Cho H.-D., Lee D.J., Won Kang T., Woo Y. Single ZnO nanocactus gas sensor formed by etching of ZnO nanorod 2015 Nanoscale 56. Sathyamurthy R., Harris Samuel D.G., Nagarajan P.K., Arunkumar T. Geometrical variations in solar stills for improving the fresh water yield—A review 2016 Desalination and Water Treatment 57. Islam M.S., Hussain T., Rao G.S., Panigrahi P., Ahuja R. Augmenting the sensing aptitude of hydrogenated graphene by crafting with defects and dopants 2016 Sensors and Actuators, B: Chemical 58. Neetu Kumari S., Pillai A.S. A survey on global requirements elicitation issues and proposed research framework 2013 Proceedings of the IEEE International Conference on Software Engineering and Service Sciences, ICSESS 59. Kaimal V.K., Vijayabalan P. An investigation on the effects of using DEE additive in a di diesel engine fuelled with waste plastic oil 2016 Fuel 60. Seeli D.S., Prabaharan M. Guar gum succinate as a carrier for colon-specific drug delivery 2016 International Journal of Biological Macromolecules 61. Sankar A., Natarajan S., Zineb T.B., Ganapathi M. Investigation of supersonic flutter of thick doubly curved sandwich panels with CNT reinforced facesheets using higher-order structural theory 2015 Composite Structures 62. Hussain T., Islam M.S., Rao G.S., Panigrahi P., Gupta D., Ahuja R. Hydrogen storage properties of light metal adatoms (Li, Na) decorated fluorographene monolayer 2015 Nanotechnology 63. Ryu S.R., Ram S.D.G., Lee S.J., Cho H.-D., Lee S., Kang T.W., Kwon S., Yang W., Shin S., Woo Y. Vertical current-flow enhancement via fabrication of GaN nanorod p-n junction diode on graphene 2015 Applied Surface Science 64. Ashok Kumar K., Manonmani J., Senthilselvan J. Effect on interfacial charge transfer resistance by hybrid co-sensitization in DSSC applications 2014 Journal of Materials Science: Materials in Electronics 65. Jananakumar D., Mani P. Synthesis, growth and characterization of L-valine zinc hydrochloride - A novel semi-organic nonlinear optical single crystal 2013 Journal of Nonlinear Optical Physics and Materials 66. Sankar A., Natarajan S., Ganapathi M. Dynamic instability analysis of sandwich plates with CNT reinforced facesheets 2016 Composite Structures 67. Helen S.J., Devadason S., Mahalingam T. Improved physical properties of spray pyrolysed Al:CdO nanocrystalline thin films 2016 Journal of Materials Science: Materials in Electronics 68. Rao G.S., Hussain T., Islam M.S., Sagynbaeva M., Gupta D., Panigrahi P., Ahuja R. Adsorption mechanism of graphene-like ZnO monolayer towards CO2 molecules: Enhanced CO2 capture 2015 Nanotechnology 69. Kurbanov S.S., Kang T.W. Effect of ultraviolet-illumination and sample ambient on photoluminescence from zinc oxide nanocrystals 2015 Journal of Luminescence 70. Surekha R., Thilagavathy S.R., Sagayaraj P., Ambujam K. Synthesis, optical, dielectric, thermal and mechanical properties of a nonlinear optical amino acid crystal: Bis-glycine hydrobromide 2014 Optik 71. Nagarajan P.K., Vijayakumar D., Paulson V., Chitharthan R.K., Narashimulu Y., Ramanarayanan, Sathyamurthy R. Theoretical characterization of ethylene glycol nano fluid for automobiles 2014 Research Journal of Pharmaceutical, Biological and Chemical Sciences 72. Sivam S.P., Michaelraj A.L., Satish Kumar S., Varahamoorthy R., Dinakaran D. Effects of electrical parameters, its interaction and tool geometry in electric discharge machining of titanium grade 5 alloy with graphite tool 2013 Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 73. Seralathan S., Roy Chowdhury D.G. Modification of centrifugal impeller and effect of impeller extended shrouds on centrifugal compressor performance 2013 Procedia Engineering 74. Kumar K.D., Ramya I., Masillamani M.R. Queue management in mobile adhoc networks(manets) 2010 Proceedings - 2010 IEEE/ACM International Conference on Green Computing and Communications, GreenCom 2010, 2010 IEEE/ACM International Conference on Cyber, Physical and Social Computing, CPSCom 2010 75. Suresh S., Ramanand A., Jayaraman D., Mani P. Growth, photoconductivity and dielectric properties of triglycine sulfate (TGS) single crystals 2010 Optoelectronics and Advanced Materials, Rapid Communications 76. Prabakaran B., Udhoji A. Experimental investigation into effects of addition of zinc oxide on performance, combustion and emission characteristics of diesel-biodiesel-ethanol blends in CI engine 2016 Alexandria Engineering Journal 77. Lee J., Subramaniam N.G., Kowalik I.A., Nisar J., Lee J., Kwon Y., Lee J., Kang T., Peng X., Arvanitis D., Ahuja R. Towards a new class of heavy ion doped magnetic semiconductors for room temperature applications 2015 Scientific Reports 78. Panackal J.J., Pillai A.S. Adaptive utility-based anonymization model: Performance evaluation on big data sets 2015 Procedia Computer Science 79. Victor C.S., Amalanathan G. Construction of strategic connected dominating set for mobile ad hoc networks 2014 Journal of Computer Science 80. Moorthy Manthira M.S., Rajeswari M. Virtual host based intrusion detection system for cloud 2013 International Journal of Engineering and Technology 81. Ramakrishnan R., Wilson P., Sivakumar T., Jemina I. A comparative study of hydroxyapatites synthesized using various fuels through aqueous and alcohol mediated combustion routes 2013 Ceramics International 82. Srinivasan M.K., Sarukesi K., Keshava A., Revathy P. eCloudIDS tier-1 uX-engine subsystem design and implementation using Self-Organizing Map (SOM) for secure cloud computing environment 2012 Communications in Computer and Information Science 83. Poonkuzhali G., Kumar R.K., Keshav R.K., Sudhakar P., Sarukesi K. Correlation based method to detect and remove redundant web document 2011 Advanced Materials Research 84. Udhayakumar A., Charles V., Uthariaraj V.R. Stochastic simulation-based genetic algorithm for chance constrained fractional programming problem 2010 International Journal of Operational Research 85. Kannan V.K., Murali V., Rajadurai A., Nageswara Rao B. Tension and compression strength evaluation of composite plates with circular holes 2010 Journal of Reinforced Plastics and Composites 86. Garg P., Dodiyal A.K. Reducing RF blackout during re-entry of the reusable launch vehicle 2009 IEEE Aerospace Conference Proceedings 87. P.K. N., El-Agouz S.A., D.G. H.S., M. E., B. M., D. M.B., Sathyamurthy R., R. B. Analysis of an inclined solar still with baffles for improving the yield of fresh water 2017 Process Safety and Environmental Protection 88. Harris Samuel D.G., Nagarajan P.K., Arunkumar T., Kannan E., Sathyamurthy R. Enhancing the solar still yield by increasing the surface area of water—A review 2016 Environmental Progress and Sustainable Energy 89. Kaimal V.K., Vijayabalan P. An analysis on combustion and emission characteristics of CI engine using blends of cotton seed biodiesel 2015 International Journal of Renewable Energy Research 90. Jinila B., Komathy Cluster oriented ID based multi-signature scheme for traffic congestion warning in Vehicular Ad hoc Networks 2015 Advances in Intelligent Systems and Computing 91. Kumari.s N., Pillai A.S. A study on the software requirements elicitation issues - Its causes and effects 2014 2013 3rd World Congress on Information and Communication Technologies, WICT 2013 92. Nandagopal S., Ganesh Kumar A., Dhanalakshmi D.P., Prakash P. Bio-prospecting the antibacterial and anticancer activities of silver nanoparticles synthesized using Terminalia chebula seed extract 2014 International Journal of Pharmacy and Pharmaceutical Sciences 93. Induja S., Raghavan P.S. Catalytic efficiency of copper oxide in degradation of phenol using sintered calcium phosphate (SCaP) as catalyst support 2013 Catalysis Communications 94. Pradeep J., Devanathan R. Comparative analysis and simulation of PWM and SVPWM inverter fed permanent magnet synchronous motor 2012 Proceedings - ICETEEEM 2012, International Conference on Emerging Trends in Electrical Engineering and Energy Management 95. Rajmohan V., Ranganathan V. Design of counters using reversible logic 2011 ICECT 2011 - 2011 3rd International Conference on Electronics Computer Technology 96. Thilagavathy S.R., Ambujam K. Growth of glycine picrate crystal by conventional and SR method 2011 Transactions of the Indian Institute of Metals 97. Suresh S., Ramanand A., Jayaraman D., Mani P., Anand K. Growth, optical, theoretical and dielectric studies on L-valine single crystals 2011 International Journal of ChemTech Research 98. Sankaranarayanan M., Ghista D.N., Chua L.P., Seng T.Y., Sundaravadivelu K., Kassab G.S. Blood flow in an out-of-plane aorto-left coronary sequential bypass graft 2010 Computational Cardiovascular Mechanics: Modeling and Applications in Heart Failure 99. Vijayabalan P., Nagarajan G. Performance, emission, and combustion characteristics of a ci engine using liquid petroleum gas and neem oil in dual fuel mode 2010 Thermal Science 100. Charles V., Udhayakumar A., Rhymend Uthariaraj V. An approach to find redundant objective function(s) and redundant constraint(s) in multi-objective nonlinear stochastic fractional programming problems 2010 European Journal of Operational Research

Academic Facilities

Library Database

Books: 105832 Online Journals/Magazines: 42262 Back Volumes: 4606 Project Reports: 3221 Thesis & Dissertations: 72 News Papers: 12 Book Bank: 83850

Courses & Programme

  • DisciplineARCHITECTURE
  • Program LevelPost Graduate (PG)
  • Branch/SubjectNA
  • No. of seats15
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500

Eligibility Criteria: ( UG in Architecture with minimum 50% score Or UG in Civil Engineering with minimum 50% score Or UG in Economics with minimum 50% score Or UG in Geography with minimum 50% score Or UG in Sociology with minimum 50% score Or UG in B.Planning with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineCOMPUTER APPLICATIONS
  • Program LevelPost Graduate (PG)
  • Branch/SubjectNA
  • No. of seats33
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500

Eligibility Criteria: ( UG in Computer Applications with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineLAW
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectNA
  • No. of seats10
  • Course Duration (In Months)60
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3500
  • Annual Total FeesUSD 6000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 4500
  • Annual Total FeesUSD 7000

Eligibility Criteria: ( 10+2 in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineLAW
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectNA
  • No. of seats10
  • Course Duration (In Months)60
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3500
  • Annual Total FeesUSD 600
  • Non-SAARC Country

  • Annual Tuition FeesUSD 4500
  • Annual Total FeesUSD 7000

Eligibility Criteria: ( 10+2 in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineOPTOMETRY
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectNA
  • No. of seats10
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Biology (PCB) with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectAeronautical Engineering
  • No. of seats30
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 5500
  • Annual Total FeesUSD 8000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 7500
  • Annual Total FeesUSD 10000

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Mathematics (PCM) with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPost Graduate (PG)
  • Branch/SubjectAeronautical Engineering
  • No. of seats10
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2500
  • Annual Total FeesUSD 5000

Eligibility Criteria: ( UG in Aeronautical Engineering with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectAerospace Engineering
  • No. of seats20
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 5500
  • Annual Total FeesUSD 8000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 7500
  • Annual Total FeesUSD 10000

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Mathematics (PCM) with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPhD
  • Branch/SubjectAerospace Engineering
  • No. of seats5
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500

Eligibility Criteria: ( PG in Aerospace with minimum 65% score )

Additional Exams/Criteria:

  • DisciplineMANAGEMENT
  • Program LevelPost Graduate (PG)
  • Branch/SubjectAirport and Aviation Business Management
  • No. of seats10
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 4500
  • Annual Total FeesUSD 7000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 6000
  • Annual Total FeesUSD 8500

Eligibility Criteria: ( UG in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineARCHITECTURE
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectArchitecture
  • No. of seats20
  • Course Duration (In Months)60
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3500
  • Annual Total FeesUSD 6000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 5000
  • Annual Total FeesUSD 7500

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Mathematics (PCM) with minimum 50% score )

Additional Exams/Criteria: NATA with minimum 40 score

  • DisciplineENGINEERING
  • Program LevelPhD
  • Branch/SubjectArtificial Intelligence
  • No. of seats2
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500

Eligibility Criteria: ( PG in Computer science and engineering with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectAutomobile Engineering
  • No. of seats20
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3500
  • Annual Total FeesUSD 6000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 5000
  • Annual Total FeesUSD 7500

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Mathematics (PCM) with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPost Graduate (PG)
  • Branch/SubjectAutomotive Technology
  • No. of seats10
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2500
  • Annual Total FeesUSD 5000

Eligibility Criteria: ( UG in Automobile Engineering with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineMANAGEMENT
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectAviation Management
  • No. of seats20
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 3000
  • Annual Total FeesUSD 5500

Eligibility Criteria: ( 10+2 in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPost Graduate (PG)
  • Branch/SubjectAvionics
  • No. of seats10
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2500
  • Annual Total FeesUSD 5000

Eligibility Criteria: ( UG in Aeronautical Engineering with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectBio Technology
  • No. of seats20
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3500
  • Annual Total FeesUSD 6000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 5000
  • Annual Total FeesUSD 7500

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Mathematics (PCM) with minimum 50% score Or 10+2 in Physics, Chemistry and Biology (PCB) with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPhD
  • Branch/SubjectBiotechnology
  • No. of seats5
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500

Eligibility Criteria: ( PG in Biotechnology with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectBiotechnology (spec. in Genetic Engineering )
  • No. of seats20
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3500
  • Annual Total FeesUSD 6000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 5000
  • Annual Total FeesUSD 7500

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Biology (PCB) with minimum 50% score Or 10+2 in Physics, Chemistry and Mathematics (PCM) with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectChemical Engineering
  • No. of seats20
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3500
  • Annual Total FeesUSD 6000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 5000
  • Annual Total FeesUSD 7500

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Mathematics (PCM) with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPhD
  • Branch/SubjectChemical Engineering
  • No. of seats5
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500

Eligibility Criteria: ( PG in Chemical Engineering with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineSCIENCE
  • Program LevelPost Graduate (PG)
  • Branch/SubjectChemistry
  • No. of seats10
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000

Eligibility Criteria: ( UG in Chemistry with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectCivil Engineering
  • No. of seats20
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3500
  • Annual Total FeesUSD 6000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 5000
  • Annual Total FeesUSD 7500

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Mathematics (PCM) with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPhD
  • Branch/SubjectCivil Engineering
  • No. of seats5
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500

Eligibility Criteria: ( PG in Civil Engineering with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPost Graduate (PG)
  • Branch/SubjectCivil Engineering and Structural Engineering
  • No. of seats10
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2500
  • Annual Total FeesUSD 5000

Eligibility Criteria: ( UG in Civil Engineering with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPhD
  • Branch/SubjectComputer Applications
  • No. of seats5
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500

Eligibility Criteria: ( PG in Computer Applications with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPost Graduate (PG)
  • Branch/SubjectComputer Science (Data Science)
  • No. of seats10
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2500
  • Annual Total FeesUSD 5000

Eligibility Criteria: ( UG in Computer science and engineering with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectComputer Science and Engineering
  • No. of seats30
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 4000
  • Annual Total FeesUSD 6500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 6000
  • Annual Total FeesUSD 8500

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Mathematics (PCM) with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPhD
  • Branch/SubjectComputer Science and Engineering
  • No. of seats5
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500

Eligibility Criteria: ( PG in Computer science and engineering with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectComputer Science and Engineering (Spec. in Artificial Intelligence and Machine Learning)
  • No. of seats20
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 4000
  • Annual Total FeesUSD 6500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 6000
  • Annual Total FeesUSD 8500

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Mathematics (PCM) with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPost Graduate (PG)
  • Branch/SubjectComputer Science and Engineering (Spec. in Artificial Intelligence and Machine Learning)
  • No. of seats10
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2500
  • Annual Total FeesUSD 5000

Eligibility Criteria: ( UG in Computer science and engineering with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineLAW
  • Program LevelPost Graduate (PG)
  • Branch/SubjectCorporate Law
  • No. of seats10
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2500
  • Annual Total FeesUSD 5000

Eligibility Criteria: ( UG in Law with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineHUMANITIES
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectEconomics
  • No. of seats20
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000

Eligibility Criteria: ( 10+2 in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectElectrical and Electronics Engineering
  • No. of seats20
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3500
  • Annual Total FeesUSD 6000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 5000
  • Annual Total FeesUSD 7500

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Mathematics (PCM) with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPost Graduate (PG)
  • Branch/SubjectElectrical and Electronics Engineering
  • No. of seats10
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2500
  • Annual Total FeesUSD 5000

Eligibility Criteria: ( UG in Electronics and Electrical with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPhD
  • Branch/SubjectElectrical and Electronics Engineering
  • No. of seats5
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500

Eligibility Criteria: ( PG in Electrical with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectElectronics and Communication Engineering
  • No. of seats20
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3500
  • Annual Total FeesUSD 6000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 5000
  • Annual Total FeesUSD 7500

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Mathematics (PCM) with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPost Graduate (PG)
  • Branch/SubjectElectronics and Communication with (spl. In Embedded Systems)
  • No. of seats10
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2500
  • Annual Total FeesUSD 5000

Eligibility Criteria: ( UG in Electronics and Communication with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineARTS
  • Program LevelPost Graduate (PG)
  • Branch/SubjectEnglish
  • No. of seats10
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000

Eligibility Criteria: ( UG in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineSCIENCE
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectFashion Design
  • No. of seats14
  • Course Duration (In Months)36
  • Examination PatternYearly

    SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500

Eligibility Criteria: ( 10+2 in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineMANAGEMENT
  • Program LevelPhD
  • Branch/SubjectFinancial Management
  • No. of seats2
  • Course Duration (In Months)35
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500

Eligibility Criteria: ( PG in Any Subject with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineSCIENCE
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectFood Technology
  • No. of seats14
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000

Eligibility Criteria: ( 10+2 in Biology with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineMANAGEMENT
  • Program LevelPost Graduate (PG)
  • Branch/SubjectGeneral
  • No. of seats10
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 4000
  • Annual Total FeesUSD 6500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 5000
  • Annual Total FeesUSD 7500

Eligibility Criteria: ( UG in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineCOMMERCE
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectGeneral
  • No. of seats20
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500

Eligibility Criteria: ( 10+2 in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineMANAGEMENT
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectGeneral Management
  • No. of seats20
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500

Eligibility Criteria: ( 10+2 in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineMANAGEMENT
  • Program LevelPhD
  • Branch/SubjectHuman Resource Management
  • No. of seats2
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500

Eligibility Criteria: ( PG in Any Management Subjects with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectInformation Technology
  • No. of seats20
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3500
  • Annual Total FeesUSD 6000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 5000
  • Annual Total FeesUSD 7500

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Mathematics (PCM) with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineLAW
  • Program LevelPost Graduate (PG)
  • Branch/SubjectInternational Law
  • No. of seats10
  • Course Duration (In Months)12
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3000
  • Annual Total FeesUSD 5500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 3500
  • Annual Total FeesUSD 6000

Eligibility Criteria: ( UG in Law with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineLAW
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectLaw
  • No. of seats10
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3000
  • Annual Total FeesUSD 5500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 4000
  • Annual Total FeesUSD 6500

Eligibility Criteria: ( UG in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineLAW
  • Program LevelPhD
  • Branch/SubjectLaw
  • No. of seats3
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500

Eligibility Criteria: ( PG in Law with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectMechanical Engineering
  • No. of seats20
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3500
  • Annual Total FeesUSD 6000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 5000
  • Annual Total FeesUSD 7500

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Mathematics (PCM) with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectMechatronics
  • No. of seats20
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3500
  • Annual Total FeesUSD 6000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 5000
  • Annual Total FeesUSD 7500

Eligibility Criteria: ( 10+2 in Physics, Chemistry and Mathematics (PCM) with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPost Graduate (PG)
  • Branch/SubjectMechatronics
  • No. of seats10
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2500
  • Annual Total FeesUSD 5000

Eligibility Criteria: ( UG in Mechanical Engineering with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineHUMANITIES
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectPolitical Science
  • No. of seats15
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000

Eligibility Criteria: ( 10+2 in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineHUMANITIES
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectPsychology
  • No. of seats15
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000

Eligibility Criteria: ( 10+2 in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineHUMANITIES
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectSociology
  • No. of seats15
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1000
  • Annual Total FeesUSD 3500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000

Eligibility Criteria: ( 10+2 in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineMANAGEMENT
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectTravel and Tourism Management
  • No. of seats20
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500

Eligibility Criteria: ( 10+2 in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineSCIENCE
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectVisual Communication
  • No. of seats20
  • Course Duration (In Months)36
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 1500
  • Annual Total FeesUSD 4000
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500

Eligibility Criteria: ( 10+2 in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineENGINEERING
  • Program LevelPost Graduate (PG)
  • Branch/SubjectMechanical Engineering (Design)
  • No. of seats10
  • Course Duration (In Months)24
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 2000
  • Annual Total FeesUSD 4500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 2500
  • Annual Total FeesUSD 5000

Eligibility Criteria: ( UG in Mechanical Engineering with minimum 60% score )

Additional Exams/Criteria:

  • DisciplineDESIGN
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectCommunication Design
  • No. of seats20
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3000
  • Annual Total FeesUSD 5500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 4000
  • Annual Total FeesUSD 6500

Eligibility Criteria: ( 10+2 in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineDESIGN
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectInterior Design with Specialization in Accessories and Furniture Design & User Experience Design
  • No. of seats20
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3000
  • Annual Total FeesUSD 5500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 4000
  • Annual Total FeesUSD 6500

Eligibility Criteria: ( 10+2 in Any Subject with minimum 50% score )

Additional Exams/Criteria:

  • DisciplineDESIGN
  • Program LevelUnder Graduate (UG)
  • Branch/SubjectFashion and Apparel Design with specialization in Fashion Marketing and User Experience Design
  • No. of seats20
  • Course Duration (In Months)48
  • Examination Patternsemester

    SAARC Country

  • Annual Tuition FeesUSD 3000
  • Annual Total FeesUSD 5500
  • Non-SAARC Country

  • Annual Tuition FeesUSD 4000
  • Annual Total FeesUSD 6500

Eligibility Criteria: ( 10+2 in Any Subject with minimum 50% score )

Additional Exams/Criteria:

Previous
Next

No Information

CAMPUS LIFE

No Information

EVENTS

No Information

INFRASTRUCTURE

No Information

No Updates

India is home to 40 UNESCO World Heritage Sites out of which there are 32 cultural, 7 natural and 1 mixed property.